The New 3U NX-Amplifier Series
We designed the NX Series for our customers who still love traditional, massive Amplifiers with very big transformers. The 19” cases are 3U high to offer enough space for over dimensioned transformers and capacitors. The illuminated led rings around the potentiometer indicate the input level of the corresponding input channel. It will light green if an input signal is present. Yellow if the input level reaches the 0dB level and red to indicate clipping. This solid design is made without any compromises.
NX6200 3U Power Amplifier
Model Name
NX-3200
NX-4200
NX-5200
NX-6200
GS1 (EAN) CODE
4260318511827
4260318511834
4260318511841
4260318512022
System Type
2-Channel Class TD Amplifier
2-Channel Class TD Amplifier
2-Channel Class TD Amplifier
2-Channel Class TD Amplifier
Output Power all channels driven 20Hz - 20 kHz, 0.1 % THD
2 x 3000W @ 2Ohm 2 x 2250W @ 4Ohm 2 x 1500W @ 8Ohm
2 x 4000W @ 2Ohm 2 x 3000W @ 4Ohm 2 x 2000W @ 8Ohm
2 x 5000W @ 2Ohm 2 x 3750W @ 4Ohm 2 x 2500W @ 8Ohm
2 x 5600W @ 2Ohm 2 x 4200W @ 4Ohm 2 x 2800W @ 8Ohm
Output Power Bridge mode
1 x 6000W @ 4Ohm 1 x 4500W @ 8Ohm 1 x 3000W @ 16Ohm
1 x 8000W @ 4Ohm 1 x 6000W @ 8Ohm 1 x 4000W @ 16Ohm
1 x 10000W @ 4Ohm 1 x 7500W @ 8Ohm 1 x 5000W @ 16Ohm
1 x 11200W @ 4Ohm 1 x 8400W @ 8Ohm 1 x 5600W @ 16Ohm
THD+N @ 8Ω 1kHz
≤0.05%
≤0.05%
≤0.05%
≤0.05%
Slew Rate
>35V/μs
>35V/μs
>35V/μs
>35V/μs
Frequency Response @1Watt, 8Ohm
10Hz -20kHz / ±0.5dB
10Hz -20kHz / ±0.5dB
10Hz -20kHz / ±0.5dB
10Hz -20kHz / ±0.5dB
Damping Factor (@20Hz-100Hz)
>5000
>5000
>5000
>5000
Signal to Noise Ratio 20Hz -20 kHz
>100dB
>100dB
>100dB
>100dB
Channel Separation Crosstalk@1kHz
>70dB
>70dB
>70dB
>70dB
Voltage Gain
43.0dB (0,775V:110V)
44,3dB (0,775V:127V)
45,2dB (0,775V:141,5V)
45,7dB (0,775V:150V)
Input Sensitivity
0.775V
0.775V
0.775V
0.775V
Input Impedance
20k Ohm Balanced 10k Ohm Unbalanced
20k Ohm Balanced 10k Ohm Unbalanced
20k Ohm Balanced 10k Ohm Unbalanced
20k Ohm Balanced 10k Ohm Unbalanced
Front Control
Power switch, Gain control
Power switch, Gain control
Power switch, Gain control
Power switch, Gain control
Rear Control
Mode Switch
Mode Switch
Mode Switch
Mode Switch
LED Indicators
Signal Indicator, Protect
Signal Indicator, Protect
Signal Indicator, Protect
Signal Indicator, Protect
Input Connectors
XLR Active balanced pin1 gnd / pin 2+ / pin3-
XLR Active balanced pin1 gnd / pin 2+ / pin3-
XLR Active balanced pin1 gnd / pin 2+ / pin3-
XLR Active balanced pin1 gnd / pin 2+ / pin3-
Output Connectors
2 Neutrik NL4 Sockets 2 Binding Posts
2 Neutrik NL4 Sockets 2 Binding Posts
2 Neutrik NL4 Sockets 2 Binding Posts
2 Neutrik NL4 Sockets 2 Binding Posts
Cooling
Low Noise Continuously Variable speed fan
Low Noise Continuously Variable speed fan
Low Noise Continuously Variable speed fan
Low Noise Continuously Variable speed fan
Protection
Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads
Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads
Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads
Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads
Load Protection
On/Off muting DC fault power Supply shutdown
On/Off muting DC fault power Supply shutdown
On/Off muting DC fault power Supply shutdown
On/Off muting DC fault power Supply shutdown
Operating Voltage
230V (+/- 10%), 50-60Hz USA Version 110V (+/- 10%), 50-60Hz
230V (+/- 10%), 50-60Hz USA Version 110V (+/- 10%), 50-60Hz
230V (+/- 10%), 50-60Hz USA Version 110V (+/- 10%), 50-60Hz
230V (+/- 10%), 50-60Hz USA Version 110V (+/- 10%), 50-60Hz
Idle Power Consumption
< 80W
< 100W
< 120W
< 150W
Max. Power Consumption
< 3500W
< 5000W
< 6000W
< 7000W
Fuse
T-25A
T-30A
T-35A
T-35A
Dimensions (h/w/d)
19“/3U 483W x 485D x 132H
19“/3U 483W x 485D x 132H
19“/3U 483W x 485D x 132H
19“/3U 545W x 485D x 132H
Net weight
38 kg
39,5 kg
44,5 kg
50 kg
